Crucial P3 CTXXXP3SSD8E PCIe NVMe SSD 2TB (M.2 22 x 80 mm)

138.03 $
incl. Tax (19%)
plus shipping charges
3 pieces in stock.Until 3pm, shipping today.Also Express shipping possible.
Installation in our repair shop

SS01S2 SSD 2TB (M.2 22 x 80 mm)

SS01S2 SSD 2TB (M.2 22 x 80 mm)

In stock
170.13 $
incl. Tax (19%)
plus shipping charges

Product Info

Manufacturer
Crucial
Item Number
CTXXXP3SSD8E
Primary Partnummer
CT2000P3SSD8

The offered manufacturer number is an alternative (substitute) to the spare part number you are looking for.

Common data

Condition
New
Manufacturer
Crucial

Technical Data

Capacity (GB)
2000 GB
Interface
PCIe NVMe SSD
Form factor
M.2 22 x 80 mm
NAND
Advanced 3D NAND
Sequential Read (MB/s)
3500
Sequential Write (MB/s)
3000
Special features
Acronis True Image / M.2 Key M / S.M.A.R.T support

Pros of the SSD

  • working noiseless
  • low power-consumption
  • longer period of operation in battery-mode
  • extremely fast access times
  • no mechanical abrasion
  • extremely tough against agitation and vibration
  • SSD’s tolerate temperatures between 0 and 70 degree of Celsius

Category

Category
Hard Disk Drives / HDD
Usage
Laptop
Excerpt of suitable models for P/N CTXXXP3SSD8E
Sager Notebook NP8652 (P650SG) , Clevo P771ZM , Sager Notebook NP8670 (P670SA) , Sager Notebook NP7155 (N155SD) , Nexoc G808 (P771ZM) , Acer Aspire R13 (R7-372T) , Asus ROG G752VT , Acer Aspire V 17 Nitro (VN7-792G) , Dell Inspiron 15 (3552) , Sager Notebook NP8677-S (P670RE3)

You've found this article over a part number. We'll check if it's the correct sparepart for your machine. To do this, please insert the manufacturer and the name of the model in the order comment.

How to identify my notebook model?

Videos & Contributions

What are the differences between M.2 SSDs?

There are a number of different M.2 SSDs. They differ in design, interfaces and installation. In this video we show the different variants.

Learn more >
New SSD? - How to move your data to your new SSD

New SSD? - How to move your data to your new SSD

Have you bought a new SSD, but want to keep the data from your old one? We show how this is possible.
Learn more >
This is how you can recognize a failure of your SSD at an early stage

This is how you can recognize a failure of your SSD at an early stage

A hard drive failure is one of the worst things that can happen to you. Because private data is so often irrevocably lost. In this post, we'll show you how to check the health status of your hard drive.
Learn more >

Important and useful informations about laptop Hard Disk Drives

Frequently asked questions about Hard Disk Drives

  • Are the S-ATA standards compatible?

    Yes, the SATA standards are compatible to each other, however the slowest involved connection type will  always be used. This means that connecting a SATA 6Gb/s SSD to a SATA 3Gb/s controller will severely limit its peak performance.

    More information can be found in the FAQ “What is the difference between P-ATA (IDE), S-ATA, S-ATA II and S-ATA III?”

  • How can I format or partition a hard drive?

    You can use the disk management utility built into Windows 10.

    1. Hit the Windows key and type "Control Panel", then hit enter
    2. Left click on Administrative Tools
    3. Select Computer Management and then Disk Management.
    4. After a short loading time you will be shown all connected drive with their respective partitions.
    5. Right click on the unformatted drive and click format.
    6. Follow the wizard to complete the formatting process.
  • What hard drive can I install in my Notebook?

    You have to pay attention, that your hard drive uses the same connection type and form factor or height.

    With the very common 2.5” hard drives you have to check whether your notebook still uses the old PATA standard or SATA and also you have to check what height is compatible since there are multiple heights. 7mm, 9mm and 15mm are the most common ones.

    For SSDs there are also small form actors like mSATA or M.2. With the latter one you have to check if the slot supports the SATA and/or PCIe (NVMe) protocol.

    The only thing that is not limited is the capacity and speed of your new drive.

  • What is the difference between P-ATA (IDE), S-ATA, S-ATA II and S-ATA III ?

    The difference is in the type of connection and its speed.

    • P-ATA/IDE (IDE 100/133) Parallel connection with transfer rates of up to 1 Gbit/s or 100 MB/s to 133 MB/s.
    • S-ATA (SATA 150) Serial connection with transfer rates of up to 1.5 Gbit/s or 150 MB/s.
    • S-ATA II (SATA 300) Serial connection with transfer rates of up to 3.0 Gbit/s or 300 MB/s.
    • S-ATA III (SATA Revision 3.0) Serial connection with transfer rates of up to 6.0 Gbit/s or 600 MB/s.

All questions about Hard Disk Drives

loader

Accessories, suitable alternative products and recommendations

IPC-Computer SCMS02 original M.2 SSD Standoff Screw Kit 31 pieces

IPC-Computer SCMS02 original M.2 SSD Standoff Screw Kit 31 pieces
In stock
12.84 $
incl. Tax (19%)
plus shipping charges

IPC-Computer SCREW2 Screwdriver and und Opener Set - 80 Pieces

IPC-Computer SCREW2 Screwdriver and und Opener Set - 80 Pieces
In stock
41.73 $
incl. Tax (19%)
plus shipping charges

IPC-Computer USBGEK M.2 SSD enclosure with SATA/PCIe support

IPC-Computer USBGEK M.2 SSD enclosure with SATA/PCIe support
In stock
25.68 $
incl. Tax (19%)
plus shipping charges